Lynn L. Bergeson Included in List of Top Ten Experts in EHS Issues Related to Engineered Nanomaterials

We are pleased to announce that Lynn L. Bergeson is included in the Nanotechnology Law & Business list of the top ten experts in environmental, health, and safety (EHS) issues related to engineered nanomaterials. Nanotechnology Law & Business states that they chose ten individuals with “substantial expertise” in EHS issues related to engineered nanomaterials and that they “expect these individuals to play leading roles in nanotechnology law and business.” Nanotechnology Law & Business is a peer-reviewed journal devoted to the legal, business, and policy aspects of small scale technologies.

EC Begins Public Consultation to Prepare for Scientific Hearing on Nanotechnology

The European Commission (EC) will hold a scientific hearing on nanotechnology on September 10, 2009. The hearing will focus on the scientific aspects of the issues covered in the nanotechnology opinions issued by the Scientific Committee on Emerging and Newly Identified Health Risks (SCENIHR) and the Scientific Committee on Consumer Products (SCCP) (which is now replaced by the Scientific Committee on Consumer Safety (SCCS)). To prepare for the hearing, the EC is launching a public consultation relating to the three main objectives to be addressed:

  • Identification of any possible topics which have not been covered in the opinions from the relevant European Union (EU) risk assessment committees and bodies;
  • Identification of what are -- according to current scientific knowledge -- the main potential risks that could emerge from the use of nanomaterials in the future; and
  • Identification of the issues to be discussed at the hearing, including provision of background information and comments on those issues.

The outcome of the consultation will be presented at the scientific hearing.  Comments are due June 19, 2009.

 

European Parliament Urges the Labeling of Nanomaterials in Consumer Products

In an April 24, 2009, press release, the European Parliament (EP) calls for the provision of information to consumers on the use of nanomaterials in consumer products. According to the EP, all ingredients present in the form of nanomaterials in substances, mixtures, or articles should be clearly indicated in the product labeling. The press release also specifically calls for the European Commission (EC) to evaluate the need to review the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) concerning:

  • Simplified registration for nanomaterials manufactured or imported below one tonne;
  • Consideration of all nanomaterials as new substances;
  • A chemical safety report with exposure assessment for all registered nanomaterials; and
  • Notification requirements for all nanomaterials placed on the market on their own, in preparations, or in articles.

The EP also calls for the EC to evaluate the need to review worker protection legislation concerning:

  • The use of nanomaterials only in closed systems or in other ways that exclude exposure of workers as long as it is not possible to detect reliably and control exposure;
  • A clear assignment of liability to producers and employers arising from the use of nanomaterials; and
  • Whether all exposure routes (inhalation, dermal, and other) are addressed.

 

Australian Unions Call for Regulation of Nanomaterials

On April 14, 2009, the Australian Council of Trade Unions (ACTU) issued a press release entitled “Nanotech Poses Possible Health and Safety Risk to Workers and Needs Regulation.” According to ACTU, “[t]he rapidly growing nanotechnology market in Australia requires urgent regulation to protect the health and safety of workers and consumers.” ACTU notes that, currently, there is no mandatory register in Australia of who is importing, manufacturing, supplying, or selling nanomaterials, and no requirement to label products.

Continue Reading...

NIOSH Requests Data on CNTs

On April 8, 2009, the National Institute for Occupational Safety and Health (NIOSH) published a Federal Register notice announcing that it “intends to evaluate the scientific data on carbon nanotubes (CNTs) and develop appropriate communication documents, such as an Alert and/or Current Intelligence Bulletin [CIB], which will convey the potential health risks and recommend measures for the safe handling of these materials.” CIBs are issued by NIOSH “to disseminate new scientific information about occupational hazards. A CIB may draw attention to a previously unrecognized hazard, report new data on a known hazard, or disseminate information on hazard control.”

Continue Reading...

EPA Seeks Joint Applications from U.S. and UK Partners Regarding Nano Research

On March 31, 2009, the U.S. Environmental Protection Agency (EPA) announced the funding opportunity for its joint U.S. -- United Kingdom (UK) Research Program: Environmental Behavior, Bioavailability, and Effects of Manufactured Nanomaterials. EPA states that the outputs of the Program will be used to further scientific understanding of the fate, behavior, bioavailability, and effects of nanomaterials and risk management policy development. Two consortia, made up of UK and U.S. research institutions, will be selected for funding. EPA is seeking joint applications from U.S. and UK partners that:

  • Propose integrated model(s) of fate, behavior, bioavailability and effects for several important and representative nanomaterial classes over key environmental pathways using intrinsic material properties and life cycle analysis as a starting point for model development;
  • Validate and refine these model(s) through interdisciplinary research, addressing key assumptions and areas of uncertainty; and
  • Develop effective methods and tools to detect, assess, and monitor the presence of nanomaterials in biological and environmental samples.

EU-OSHA Report on Emerging Chemical Risks Includes Nanoparticles

On March 18, 2009, the European Union’s European Agency for Safety and Health at Work (EU-OSHA) announced the results of a report entitled Expert Forecast on Emerging Chemical Risks Related to Occupational Safety And Health. According to the Agency, “[c]ontact with a wide range of chemicals and other hazardous substances at work is endangering the health of workers across Europe, and nanotechnology is one of the risks causing most concern to experts from 21 European countries.” The report identifies the main groups of substances that could pose new and increasing risks to workers, contributing to diseases ranging from allergies, asthma, and infertility to cancer.

Continue Reading...

EP Committee Report Calls for "No Data, No Market" for Nanomaterials

On March 31, 2009, the European Parliament (EP) Committee on Environment, Public Health, and Food Safety amended and adopted a report on the regulatory aspects of nanomaterials. The January 2009 draft report was prepared by Swedish Green EP Member Carl Schlyter and urges tighter controls on nanotechnology. The report calls on the European Commission (EC) to review all relevant legislation to implement the principle “no data, no market” for all applications of nanomaterials in products with potential health, environmental, or safety impacts over their life cycle. The report reiterates the Committee’s call for labeling of consumer products containing nanomaterials, and recommends development of testing protocols and metrology standards to assess the hazard of, and exposure to, nanomaterials over their entire life cycle, using a multi-disciplinary approach. The report was adopted by a vote of 21-14.

NIOSH Publishes Approaches to Safe Nanotechnology

On March 30, 2009, the National Institute for Occupational Safety and Health (NIOSH) posted a document entitled Approaches to Safe Nanotechnology: Managing the Health and Safety Concerns Associated with Engineered Nanomaterials. The document reviews what is currently known about nanoparticle toxicity, process emissions and exposure assessment, engineering controls, and personal protective equipment. NIOSH released a draft version of the document for comment in October 2005, and then released a revised and updated version for additional comment in July 2006. According to NIOSH, the final version of this document “incorporates some of the latest results of NIOSH research, but it is only a starting point.” NIOSH states that the document serves a dual purpose: it is a summary of NIOSH’s current thinking and interim recommendations; and it is a request from NIOSH to occupational safety and health practitioners, researchers, product innovators and manufacturers, employers, workers, interest group members, and the general public to exchange information that will ensure that no worker suffers material impairment of safety or health as nanotechnology develops.