Archives

February 11, 2022

EPA Issues Enforcement Alert Regarding Ski Wax Products Containing Perfluorinated Chemicals

The U.S. Environmental Protection Agency (EPA) Office of Enforcement and Compliance Assurance (OECA) issued a January 2022 enforcement alert entitled “Violations May Put Ski Wax Users at Risk from Illegal Perfluoroalkyl Substances.” According to the enforcement alert, EPA has identified several high-performance ski wax consumer products that contain perfluorinated chemicals that were not reviewed by EPA for health risks under the Toxic Substances Control Act (TSCA). EPA notes that these wax...
June 15, 2021

PIP (3:1) Downstream Notifications Will Begin July 7, 2021

As reported in our January 6, 2021, blog item, the U.S. Environmental Protection Agency (EPA) issued final rules under Section 6(h) of the Toxic Substances Control Act (TSCA) for five persistent, bioaccumulative, and toxic (PBT) chemicals, including phenol, isopropylated phosphate (3:1) (PIP (3:1)) (86 Fed. Reg. 894). The final rules limit or prohibit the manufacture (including import), processing, and/or distribution in commerce of the five PBTs, with certain exceptions. In accordance with...
April 1, 2021

Changes to Safety Data Sheets in the EU and what it might mean for US Businesses — A Conversation with Karin Baron

This week’s All Things Chemical™ Podcast will be of interest to readers of the TSCAblog™. A brief description of the episode written by Lynn L. Bergeson is below. This week I sat down with Karin Baron, Senior Regulatory Consultant to B&C and our affiliated consultancy, The Acta Group, to discuss the European Union’s (EU) Commission Regulation issued last June relating to the completion of safety data sheets (SDS).  As listeners know, SDSs are critically important...
February 11, 2021

OSHA’s Proposed Updates to Hazard Communication Standard Will Include Particle Characteristics

The Occupational Safety and Health Administration (OSHA) is scheduled to publish a notice of proposed rulemaking (NPRM) on February 16, 2021, that would modify the Hazard Communication Standard (HCS) to conform to the United Nations’ Globally Harmonized System of Classification and Labelling of Chemicals (GHS) Revision 7 “to address issues that arose during the implementation of the 2012 update to the HCS, and provide better alignment with other U.S. agencies and international...
July 1, 2020

EC Amends REACH Annex II to Include SDS Requirements for Nanoforms

On June 26, 2020, the European Commission (EC) published a regulation in the Official Journal of the European Union that amends Annex II of the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) regulation.  Annex II describes the requirements for compiling safety data sheets (SDS).  The EC notes that specific requirements for nanoforms of substances took effect on January 1, 2020, and that information related to those requirements is to be...
April 6, 2020

NIOSH Posts Posters on 3D Printing with Filaments, Metal Powders

The National Institute for Occupational Safety and Health (NIOSH) has posted two posters from the NIOSH Nanotechnology Research Center (NTRC) on 3D printing:  3D Printing with Filaments:  Health and Safety Questions to Ask and 3D Printing with Metal Powders:  Health and Safety Questions to Ask.  The posters provide health and safety questions with different control options and information intended to reduce exposure to potential hazards.  The questions...
May 20, 2019

NIOSH Activities at 2019 AIHce EXP Include Presentations on Nanomaterials

On May 17, 2019, the National Institute for Occupational Safety and Health (NIOSH) announced that its presentations at the May 20-22, 2019, American Industrial Hygiene Conference & Expo (AIHce EXP) include: NIOSH congratulates Dr. Charles Geraci, Ph.D., Associate Director for Advanced Manufacturing, on being awarded the Henry F. Smyth, Jr. Award for his outstanding ability to recognize technical or scientific challenges that, when solved, benefit the industrial hygiene...
October 29, 2018

Safe Work Australia Guidance Includes Advice on Fine Dusts and Nanomaterials

In August 2018, Safe Work Australia (SWA) issued a national guide on classifying hazardous chemicals.  SWA intends the guidance for manufacturers and importers of substances, mixtures, and articles who have a duty under the Work Health and Safety (WHS) Act and Regulations to classify them.  SWA suggests that the guidance may also be useful for suppliers, persons undertaking business and undertakings, workers, and other persons involved with hazardous chemicals.  The guidance...
May 18, 2018

Report Available on March 2018 EUON Stakeholder Dialogue Meeting

The European Union Observatory for Nanomaterials (EUON) has posted the workshop report from the March 9, 2018, Stakeholder Dialogue meeting.  According to the report, the annual meeting focused on providing an update on EUON and allowing stakeholders an opportunity to share their views on expectations on the future development of EUON.  During his welcome address, Jukka Malm, European Chemicals Agency (ECHA), acknowledged that some stakeholders preferred a mandatory register...