Canada announced on January 9, 2015, that the New Substances Program has published six new risk assessment summaries for chemicals and polymers, including a summary for multi-wall carbon nanotubes.  Environment Canada and Health Canada conduct risk assessments on new substances.  These assessments include consideration of information on physical and chemical properties, hazards, uses, and

The Centers for Disease Control and Prevention (CDC) published a September 20, 2012, Federal Register notice seeking comment on a proposed National Institute for Occupational Safety and Health (NIOSH) exposure assessment and epidemiological study of U.S. workers exposed to carbon nanotubes (CNT) and carbon nanofibers (CNF). The notice states that the proposed research is a cross-sectional

The July 3, 2012, edition of the National Institute for Occupational Safety and Health (NIOSH) eNews includes a nanotechnology update, which states that the critical question to address is whether nanomaterials pose health or safety risks to workers employed in their manufacture and industrial use. The update includes the following “notable recent findings and areas

The U.S. Environmental Protection Agency (EPA) announced on July 2, 2012, the availability of an external review draft document entitled Nanomaterial Case Study: A Comparison of Multiwalled Carbon Nanotube and Decabromodiphenyl Ether Flame-Retardant Coatings Applied to Upholstery Textiles (EPA/600/R-12/043A). EPA states that the draft document “does not draw conclusions regarding potential environmental risks or hazards of multiwalled

The NanoRelease Project is intended to support the development of methods to understand the release of nanomaterials used in products. To do this, the Project will: (1) examine full life cycles of nanomaterials in products; (2) work through specific release scenarios at key exposure points of the life cycle; (3) organize existing material characteristics data and measurement

The U.S. Environmental Protection Agency (EPA) has announced that, in response to public comments, it will provide the public more time to comment on the December 28, 2011, proposed significant new use rules (SNUR) for 17 chemical substances that were the subject of premanufacture notices (PMN). Of particular interest, seven of the PMN substances’ reported chemical

The U.S. Environmental Protection Agency (EPA) published on December 28, 2011, proposed significant new use rules (SNUR) for 17 chemical substances that were the subject of premanufacture notices (PMN). Of particular interest, seven of the PMN substances’ reported chemical names include the term “carbon nanotube” (CNT) or “CNT.”  EPA states that because of a lack of established nomenclature for CNTs, the Toxic Substances Control Act (TSCA) Inventory names for CNTs are currently in generic form, e.g., “carbon nanotube (CNT), multi-walled carbon nanotube (MWCNT), double-walled carbon nanotube (DWCNT), or single-walled carbon nanotube (SWCNT).” EPA uses the specific structural characteristics provided by the PMN submitter to characterize more specifically the TSCA Inventory listing for an individual CNT. According to EPA, all submitters of new chemical notices for CNTs have claimed those specific structural characteristics as confidential business information (CBI). The proposed rule includes the generic chemical name along with the PMN number to identify that a distinct chemical substance was the subject of the PMN without revealing the confidential chemical identity of the PMN substance. Comments are due January 27, 2012.


Continue Reading

On September 18, 2011, Nature Nanotechnology posted an article entitled “Cell entry of one-dimensional nanomaterials occurs by tip recognition and rotation.” The authors state that materials with high aspect ratio, such as carbon nanotubes (CNT) and asbestos fibers, have been shown to cause length-dependent toxicity in certain cells because these long materials prevent complete

On May 6, 2011, the U.S. Environmental Protection Agency (EPA) promulgated a final significant new use rule (SNUR) under Section 5(a)(2) of the Toxic Substances Control Act (TSCA) for the chemical substance identified generically as multi-walled carbon nanotubes (MWCNT), which was the subject of premanufacture notice (PMN) P-08-199. Under the final SNUR, persons intending to manufacture, import, or process MWCNT for a use that is designated as a significant new use by the final rule must notify EPA at least 90 days before commencing that activity. EPA states that it believes the final rule is necessary “because the chemical substance may be hazardous to human health,” and the required notification would provide EPA with the opportunity to evaluate the intended use and, if necessary, to prohibit or limit that activity before it occurs. The final rule will be effective June 6, 2011.


Continue Reading

The National Institute for Occupational Safety and Health (NIOSH) released a draft Current Intelligence Bulletin (CIB) entitled Occupational Exposure to Carbon Nanotubes and Nanofibers, which recommends that, until results from research studies can fully elucidate the physicochemical properties of carbon nanotubes (CNT) and carbon nanofibers (CNF) that define their inhalation toxicity, employers should take