New

Subscribe to New

The Australian Industrial Chemicals Introduction Scheme (AICIS) announced on November 22, 2021, rules amendments and regulatory changes beginning on November 23, 2021, and December 10, 2021, following amendments to the Industrial Chemicals (General Rules) 2019 and the Industrial Chemicals (Consequential Amendments and Transitional Provisions) Rules 2019. After considering stakeholder feedback, the Minister for Regional…

On October 5, 2012, the U.S. Environmental Protection Agency (EPA) promulgated a final significant new use rule (SNUR) for potassium titanium oxide, which was previously the subject of a consent order under Section 5(e) of the Toxic Substances Control Act (TSCA). EPA states that, based on test data on the premanufacture notice (PMN) substance and structure…

On April 4, 2012, the U.S. Environmental Protection Agency (EPA) promulgated, through a direct final rule, significant new use rules (SNUR) for 17 chemical substances that were the subject of premanufacture notices (PMN). This includes a SNUR for “infused carbon nanostructures (generic).” According to EPA, the PMN states that the generic (non-confidential) use of the substance is…

The U.S. Environmental Protection Agency (EPA) has announced that, in response to public comments, it will provide the public more time to comment on the December 28, 2011, proposed significant new use rules (SNUR) for 17 chemical substances that were the subject of premanufacture notices (PMN). Of particular interest, seven of the PMN substances’ reported chemical…

The U.S. Environmental Protection Agency (EPA) published on December 28, 2011, proposed significant new use rules (SNUR) for 17 chemical substances that were the subject of premanufacture notices (PMN). Of particular interest, seven of the PMN substances’ reported chemical names include the term “carbon nanotube” (CNT) or “CNT.”  EPA states that because of a lack of established nomenclature for CNTs, the Toxic Substances Control Act (TSCA) Inventory names for CNTs are currently in generic form, e.g., “carbon nanotube (CNT), multi-walled carbon nanotube (MWCNT), double-walled carbon nanotube (DWCNT), or single-walled carbon nanotube (SWCNT).” EPA uses the specific structural characteristics provided by the PMN submitter to characterize more specifically the TSCA Inventory listing for an individual CNT. According to EPA, all submitters of new chemical notices for CNTs have claimed those specific structural characteristics as confidential business information (CBI). The proposed rule includes the generic chemical name along with the PMN number to identify that a distinct chemical substance was the subject of the PMN without revealing the confidential chemical identity of the PMN substance. Comments are due January 27, 2012.…

Continue Reading EPA Publishes Proposed SNURs for CNTs

Japan’s Ministry of Economy, Trade and Industry (METI) established a Committee on Safety Management for Nanomaterials, which was scheduled to hold its first meeting on December 2, 2011. METI states that it established the Committee “on the basis of the results obtained from the project ‘Research and Development of Nanoparticle Characterization Methods’ commissioned by the New…

Representative Mike Honda (D-CA) re-introduced on August 1, 2011, the Nanotechnology Advancement and New Opportunities Act (NANO Act), which seeks to promote the development and responsible stewardship of nanotechnology in the U.S. According to Rep. Honda, the legislation is designed to maintain the U.S.’s leadership role in nanotechnology research by promoting the development and commercialization of…

The U.S. Environmental Protection Agency’s (EPA) July 7, 2011, Regulatory Agenda includes several notices concerning nanoscale materials:

  • Test Rule for Certain Nanoscale Materials — EPA states that it is developing a test rule under Section 4(a) of the Toxic Substances Control Act (TSCA) to require manufacturers (defined by statute to include importers) and processors of

…

On May 6, 2011, the U.S. Environmental Protection Agency (EPA) promulgated a final significant new use rule (SNUR) under Section 5(a)(2) of the Toxic Substances Control Act (TSCA) for the chemical substance identified generically as multi-walled carbon nanotubes (MWCNT), which was the subject of premanufacture notice (PMN) P-08-199. Under the final SNUR, persons intending to manufacture, import, or process MWCNT for a use that is designated as a significant new use by the final rule must notify EPA at least 90 days before commencing that activity. EPA states that it believes the final rule is necessary “because the chemical substance may be hazardous to human health,” and the required notification would provide EPA with the opportunity to evaluate the intended use and, if necessary, to prohibit or limit that activity before it occurs. The final rule will be effective June 6, 2011.…

Continue Reading EPA Issues Final SNUR for Certain Multi-Walled Carbon Nanotubes

On April 6, 2011, several members of the NanoSafety Consortium submitted to the U.S. Environmental Protection Agency (EPA) a proposed testing agreement under Section 4 of the Toxic Substances Control Act (TSCA). Under the proposed testing agreement, the substances to be tested may include multi-walled carbon nanotubes, double-walled carbon nanotubes, single-walled carbon nanotubes, and graphene nanoplatelets. Participants…